Warning: Last items in stock!
|Max. cutting diameter of branches (fresh soft wood )||100 mm|
|Max. cutting diameter of branches (fresh hard wood)||80 mm|
|Max. cutting diameter of branches (dry hard wood)||60 mm|
|Manufacturing of cutters||Wear-resistant steel with increased hardness|
|Hopper||48 / 48 cm|
|Chipper attachment system||Three-point suspension system|
|Engine||LIFAN 15 KM OHV CZTEROSUWOWY|
|The diameter of the cutting disc||620 mm|
|Number of cutters||4 + 1 przeciw ostrze|
|The angle of rotation of the ejection tube||360˚|
|The height of the ejection tube||165|
RTS-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 10 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 620 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.
The chipper is driven by an induction four-stroke internal combustion engine with a capacity of 15 hp. The drive is transmitted through a belt transmission. The device is equipped with a safety switch located next to the hopper. Lubrication of rolling bearings is carried out through calipers in the bearing housing.