No products
Prices are tax excluded
Disc chipper RTS-630 + Chassis for off-road transport
tax excl.
Data sheet
| Weight | 300 kg |
| Max. cutting diameter of branches (fresh soft wood ) | 100 mm |
| Max. cutting diameter of branches (fresh hard wood) | 80 mm |
| Max. cutting diameter of branches (dry hard wood) | 60 mm |
| Manufacturing of cutters | Wear-resistant steel with increased hardness |
| Hopper | 48 / 48 cm |
| Engine | LIFAN 15 KM CZTEROSUWOWY OHV |
| The diameter of the cutting disc | 620 mm |
| Number of cutters | 4 + 1 przeciw ostrze |
| The angle of rotation of the ejection tube | 360˚ |
| The height of the ejection tube | 180 |
Informations
Disc chipper RTS-630 + Chassis for off-road transport
RTS-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 10 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 620 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.
The chipper is driven by an induction four-stroke internal combustion engine with a capacity of 15 hp. The drive is transmitted through a belt transmission. The device is equipped with a safety switch located next to the hopper. Lubrication of rolling bearings is carried out through calipers in the bearing housing.
