No products
Prices are tax excluded
Disc chipper RTE-630
tax excl.
Data sheet
| Weight | 260 kg |
| Max. cutting diameter of branches (fresh soft wood ) | 120 mm |
| Max. cutting diameter of branches (fresh hard wood) | 100 mm |
| Max. cutting diameter of branches (dry hard wood) | 80 mm |
| Manufacturing of cutters | HARDOX steel type 500 |
| Induction motor | PROMOTOR 7.5 kW |
| Hopper | 48 / 48 cm |
| Power supply | 3-PHASE 400V 50Hz |
| Rotation speed | 2880 rpm |
| The diameter of the cutting disc | 620 mm |
| Number of cutters | 4 + 1 przeciw ostrze |
| The angle of rotation of the ejection tube | 360˚ |
| The height of the ejection tube | 160 |
Informations
Disc chipper RTE-630
RTE-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 12 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 620 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.
The chipper is driven by an electric 7.5 kW induction motor. The drive is transmitted through a belt transmission. The device is equipped with a safety switch located at the power socket. Lubrication of rolling bearings is carried out through calipers in the bearing housing.
