Please be advised that our website uses cookie technology and at the same time does not automatically collect any information, except for the information contained in these files (so-called "cookies"). OK

Disc chipper RT-630 + Chassis for manual transport

0 zł
0 zł

To order a product or obtain information, please contact us!

Data sheet

Weight 295 kg
Max. cutting diameter of branches (fresh soft wood ) 120 mm
Max. cutting diameter of branches (fresh hard wood) 100 mm
Max. cutting diameter of branches (dry hard wood) 80 mm
Manufacturing of cutters HARDOX steel type 500
Induction motor PROMOTOR 7.5 kW
Hopper 48 / 48 cm
Power supply 3-PHASE 400V 50Hz
The diameter of the cutting disc 620 mm
Number of cutters 4 + 1 przeciw ostrze
The angle of rotation of the ejection tube 360˚
The height of the ejection tube 180


Disc chipper RT-630 + Chassis for manual transport

RT-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 13 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 630 mm, which due to its weight serves as a flywheel.

The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.

Chopper’s drive is transmitted by power transmission shaft from tractor’s WOM (right-hand rotation). We recommend using power transmission shafts fitted with a shear pin coupling (available in our offer), in the case of machine overload the pin is sheared thus switching off the drive. Lubricating of rolling bearing is done by means of grease nipples in bearing shell.

Our products